I want to get into gemstone collecting. Some gemstones have laser inscriptions on the side from the grading lab that gave the gemstone it's color. What level of magnification would I need to read and verify these inscriptions?

Let's assume that I'm working with stones that are about 5mm across. and the laser inscription is written within that, so we're talking about some very very tiny inscriptions . . . would 30x be enough for that?

2 Answers 2


It should be possible to calculate this, but note that it will depend on your eyesight as well, and the contrast you can get (directional lighting may help)

If you look at how many characters there are in a typical inscription (I've seen up to about 30 for synthetic diamonds online;this is lovely to be a worst case), and how much space they fit in, you can work out the character spacing. 30 characters in one row of 5 mm would be 0.17 mm character width including separation. 30x would make this equivalent to about 5 mm which is very large print. Normal text is more like 1-2 mm per character, which you'd achieve with a 10x jeweller's loupe. If you're collecting gemstones you probably want a good loupe anyway, and if this doesn't allow you to read the inscription, it should at least allow you to count the characters and rerun my calculation.

I do suggest getting a decent loupe. Mine is only a cheap thing, but at 10x still allows me to resolve features down to that sort of scale with decent eyesight; reading inscriptions of about twice the size I calculated above (on electronic parts) is trivial. I don't have a gemstone, let alone an engraved one, to test for certain.

You could also resolve this with a decent camera with a macro lens or extension tubes. If you have access to an SLR a cheap set of extension tubes would allow you to record the inscription. Holding everything steady and focussing can be more of a challenge


Likely 10 X would be enough; and practical. Higher magnification is difficult to hand hold steady enough , so certainly at 30 X you are talking about expensive equipment that is mounted on a stand : Typically a zoom binocular going from 10 to 40 X. Also light becomes critical. You can carry a 10 X loop in your pocket and they are the standard for looking for flaws in diamonds.

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .