BobT
  • Member for 1 year, 5 months
  • Last seen more than 1 year ago
Align concentric holes of different sizes in 2 pieces of metal on drill press
3 votes

Couple of things you could try: What I usually do: Get your two pieces of steel aligned clamp the diagonal opposite corners with vice grips. Drill the other two diagonal holes 5mm, (you will need a ...

View answer
Do kilns get hot enough to fire their own bricks?
Accepted answer
2 votes

Your firebricks will already have been fired, I'm not sure anyone makes kilns with green firebricks, they would move around when firing. On the other hand if you have used fire clay , fire cement, or ...

View answer
Cleaning and oiling a Singer 3002
2 votes

I'll add some minor detail to Allison's answer. Unplug the sewing machine! in case you step on the pedal while your hands are inside. Almost all the parts that need to be oiled will have a little oil ...

View answer
My sewing machine is accelerating for an unknown reason
2 votes

While I don't have this particular machine - Most of these universal motors use electronic speed controls that use a device called either a TRIAC or SCR, that regulate the motor speed by chopping the ...

View answer