I would like to paint acrylic sheet (Plexiglass) with acrylic paint. Both the sheet and the paint are opaque (black or white); single color all over.

  • What kinds of paint should I use? What kinds of paint should I avoid? Are all acrylic paints created equal? My local home improvement store carries acrylic paint, and they can make a variety of colors on the spot; would that paint work?

  • How to prepare surface? Do I need to apply primer first? If so, what kind of primer?

  • What can I use as varnish on top of the paint?

To put this question into perspective, painting is only the 1st stage of the process. In the 2nd stage, I will burn off the paint with a laser. So, if I've got black acrylic with white paint, and I ablate the paint selectively, then I will have black details on white background. (This is not unlike LaserMax sheets.)

I know how to do the laser. I don't know how to do the paint.

  • What location are the sheets going to end up? External or internal? Do anticipate a protective layer once the lasering is complete?
    – BeaglesEnd
    Jun 3, 2016 at 23:27
  • @BeaglesEnd Indoor location (front panel of an electronic device, for example). I would like to to add a protective layer after laser engraving, if I can figure out what kind of varnish to use for that. Jun 3, 2016 at 23:31
  • The other key question: are you expecting the plexiglass to flex? If it does, then you will get cracks.
    – Rory Alsop
    Jun 6, 2016 at 14:15
  • @Rory The Plexiglass panel will be flat at all time. It will not flex. It will not carry mechanical loads. Jun 6, 2016 at 16:09

2 Answers 2


As long as the underlying panel will not flex, yes, you can use normal acrylic paints, but a primer is required, and the recommended method is to fine sand the plexiglass to a slight roughness, then cover with primer.

Acrylic polymer varnish is ideally suited to varnishing over acrylic paint, and I'm pretty certain you can use other varnishes.


Painting on a plexi surface can be challenging! I'd clean with alcohol to prep. I'm not a big user of acrylcs but I do know there are quality gradations and I suspect the higher the quality the better the bonding. Were I in your shoes I'd ask or go buy price.

Understand that static electricity may play one of those challenging roles. To combat it, keep a moist/damp rag or paper towel in touch with the plexi sheet. Another problem will be the susceptibility to scratching. To protect your work a sheet of clear plexi would, in my opinion, be better than a clear spray. Still, if a clear varnish like cover is what you want, clear spray acrylic, should be available where you buy your paint.

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .