A few weeks ago I asked a question about Alternatives to Citadel / Games Workshop Paints, and the feedback suggested that I could simple use tubes of Acrylic paints from local hobby type shops as an alternative for painting miniatures/figures.

Some suggestions were to use a flow/pouring medium to thin it down a little, but I've seen that simply using water ( up to 50/50 mix ) is a very common practice when using acrylic paints.

So my question - Is water really a recomended element to thin down your paints? And if so, how would you store your mix for use in the near future?

I'd like to create my own little pots like the ones that citedal / games workshop use.

1 Answer 1


Paint is a chemical with a blend of several characteristics. Two of those characteristics are:
- Carrying a pigment (color)
- Sticking to a surface (glue)

A 50/50 mix would reduce the binder (glue) in the paint to half of what it was when it came out of the tube. If you were painting on paper or a medium that absorbed the paint you might get away with 50/50. Some paint makers recommend never thinning paint more than 25% with water (Liquitex thinning recommendation - not an endorsement).

Think of the polymer molecules (the binder) as forming a sort of glue that holds the pigment onto the surface. When this glue, known as polymer, gets thinned by water, it loses its strength to bond. When the paint pigment is left unbound, over time it will release from the surface on which it was applied (usually canvas) and begin to flake off. "Don't user Water to Thin Your Acrylics"

Miniatures don't absorb paint so you are relying on the strength of the binder to hold the paint onto the miniature when dry. it would be best to "stick" to the paint maker's recommendation on using water to dilute paint.

I'm a little paranoid. When painting I use as little water as possible for spot thinning. When I need thinner paint for a large surface I use a painting medium to thin the paint. I don't want to do the work of painting only to have it mess up months or years down the road because I used too much water.

Acrylic painting mediums can be used to thin acrylic paint in unlimited amounts "How to Thin Acrylic Paint"

You mention creating your own little pots like the ones the Citadel workshop uses.
Adding tap water to acrylic contains microbes and minerals - this can damage the paint. If you use water and plan to store the paint it's best to use distilled water. It's safest to use a painting medium.

The keys to storing paint are:
- Don't let it get contaminated
- Don't expose it to air.
- Use clean, air tight containers.

Believe it or not, tap water is a contaminant. Tap water contains microbes and minerals. If you add tap water to a jar of acrylic paint and store it for a few years, it will probably develop mold. from Does Acrylic Paint Go Bad?

The linked article above has good information on what makes paint go bad and how to store it.

  • Thanks. You make a good point about paint not sticking to plastic miniatures, but what about if they are painted with a good coat of plastic primer?
    – W.H.
    Jul 9, 2019 at 13:44
  • @W.H. Plastic primer is a great way to go. I'd still stay within the paint makers recommendation for diluting with water. It might be fun to do some side by side testing to see what works best for you.
    – David D
    Jul 9, 2019 at 14:14

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .